mpacts.contact.models.collision. strawcutmodel

In order to be able to use this module import it like this:

import mpacts.contact.models.collision.strawcutmodel
#or assign it to a shorter name
import mpacts.contact.models.collision.strawcutmodel as str

StrawCutModel

Description: Experimental cut model for Sam Dekkers. Geometry combinations available:

PC2 | PC1 - Rigid_Capsule Deformable_Capsule
Rigid_Capsule YES YES
Deformable_Capsule   YES

StrawCutModel (Deformable_Capsule Deformable_Capsule)

Experimental cut model for Sam Dekkers.

Parallel Compatible: No

Properties:

  • Required keywords:
    • cut_width — Width of cutting edge. (in meter)
    • pc1 — The first particle container in the binary contact detection.
    • pc2 — The second particle container in the binary contact detection. If contact detection within the same particle container is desired, and it is applicable for the contactmodel, pass the same pc to both pc1 and pc2.

This contact model is composed out of following pieces (click on the chain elements to get more information):

DefaultBoilerPlateDeformable_Cylinder_2_DataDeformable_Cylinder_1_DataCapsule_CapsuleStrawCutModelFeedback

StrawCutModel (Deformable_Capsule Rigid_Capsule)

Experimental cut model for Sam Dekkers.

Parallel Compatible: No

Properties:

  • Required keywords:
    • cut_width — Width of cutting edge. (in meter)
    • pc1 — The first particle container in the binary contact detection.
    • pc2 — The second particle container in the binary contact detection. If contact detection within the same particle container is desired, and it is applicable for the contactmodel, pass the same pc to both pc1 and pc2.

This contact model is composed out of following pieces (click on the chain elements to get more information):

DefaultBoilerPlateRigid_Cylinder_2_DataDeformable_Cylinder_1_DataCapsule_CapsuleStrawCutModelAssemble_Moment_To_Force_Couple1AssembleMoments_2AssembleForces_2AssembleForces_DeformableCylinder_1Feedback

StrawCutModel (Rigid_Capsule Rigid_Capsule)

Experimental cut model for Sam Dekkers.

Parallel Compatible: No

Properties:

  • Required keywords:
    • cut_width — Width of cutting edge. (in meter)
    • pc1 — The first particle container in the binary contact detection.
    • pc2 — The second particle container in the binary contact detection. If contact detection within the same particle container is desired, and it is applicable for the contactmodel, pass the same pc to both pc1 and pc2.

This contact model is composed out of following pieces (click on the chain elements to get more information):

DefaultBoilerPlateRigid_Cylinder_2_DataRigid_Cylinder_1_DataCapsule_CapsuleStrawCutModelFeedback